Non-Insulated Terminals 产品系列
Fork Non-Insulated Terminals
SNB SeriesSNB Series fork non-insulated terminals are tin-plated copper with a brazed seam barrel. The open fork allows the terminal to be fitted or replaced without removing the screw, which is why it is widely used on control panels and terminal blocks.
查看系列
Blade Non-Insulated Terminals
DBN SeriesDBN Series blade non-insulated terminals are stamped from copper strip and tin-plated. The bare flat tab is used where a separate insulating boot will be fitted, or in applications that require the smallest possible connector profile. Accepts 22–10 AWG copper wire.
查看系列
Pin Non-Insulated Terminals
PTN SeriesPTN Series pin non-insulated terminals are bare copper pins used without a sleeve where the connector housing provides the insulation. The solid pin is compatible with all standard relay socket and PCB connector pitches. Accepts 22–10 AWG copper wire.
查看系列
Ring Crimp Terminals—OT
OT SeriesOT Series ring crimp terminals are pressed from red copper tube and tin-plated. The seamless barrel provides a full 360° crimp contact, and the ring tongue accepts stud sizes M3 through M12 to cover the full range of panel wiring, grounding and battery connections.
查看系列
Fork Crimp Terminals
UT SeriesUT Series fork crimp terminals are made from the same tin-plated copper tube as the OT ring series. The open fork allows the terminal to be installed or removed without fully loosening the fastener, which saves time during panel assembly and field maintenance.
查看系列
Marine Bare Terminals
JB / JC / JZ SeriesJB/JC/JZ Series marine bare ring terminals are pressed from yellow copper (brass) and heavily tin-plated for salt-spray resistance. The wide palm and large stud hole suit bilge pump cables, navigation lighting and shore-power connections on boats and ships.
查看系列
C45 Insert Terminals
C45 SeriesC45 Series insert terminals are designed for DIN 46282 C45 rail-mount terminal blocks. The copper insert holds the wire with a clamping screw while the C45 flange snaps into the rail slot. Available as single-wire and multi-wire pin inserts with PVC insulation.
查看系列
Flat Double-Layer Terminals
IT Double-Layer Flat TypeIT Series flat double-layer terminals accept two conductors in a stacked arrangement within a single crimp barrel. This reduces the number of connection points when two circuits share the same terminal, and the flat profile suits connectors with limited vertical space.
查看系列
Pin Crimp Terminals
IT SeriesIT Series pin crimp terminals are machined from red copper rod and tin-plated. The solid round pin provides a low-resistance contact path to relay sockets, busbar connectors and industrial plug-in bases. Suitable for large-cross-section cable up to 50 mm².
查看系列
Ring Crimp Terminals—OTZ
OTZ SeriesOTZ Series ring crimp terminals use a brazed-seam barrel that is sealed after crimping, preventing solder wicking and electrolyte ingress. Made from red copper with a tin-plated finish, they are available from 10 mm² to 50 mm² with stud holes from M6 to M12, suited to battery, grounding and heavy-current panel connections.
查看系列
Ring Crimp Terminals—OTS
OTS SeriesOTS Series ring crimp terminals use a brazed-seam tubular barrel drawn from red copper and finished with electro tin plating. Six barrel sizes cover 16 mm² to 95 mm² conductors, each with stud holes from Φ6.2 mm to Φ12.5 mm, giving a heavy-current range for distribution boards, switchgear and earthing connections in industrial and building wiring.
查看系列行业与应用
适用于汽车、家电、机械和电力设备制造的绝缘端子。
-
工业控制与自动化
面板制造商使用环形和叉形端子进行PLC I/O接线、接触器和端子块,需要安全的螺丝连接。
-
汽车与运输
线束制造商指定彩色绝缘端子用于照明、传感器和电源电路,其中抗振动性能很重要。
-
家用电器
洗衣机、空调器和烤箱依靠全绝缘端子进行内部布线,这些布线必须保持安全且紧凑。
-
工业机械
机器制造商将环形、叉形和断开端子安装到电机、传感器和在苛刻环境中运行的控制柜。
-
电气设备制造
开关设备和配电板使用镀锡铜端子进行稳定的电流传输并抵抗腐蚀。
常见问题解答
非绝缘端子是做什么用的?
非绝缘端子将绞铜线端接在螺丝、螺柱和螺纹柱上,接头部分会用胶带、套管或V系列护套单独绝缘。它们是控制面板、开关设备、汽车线束和家电布线的标准选择,这些电缆更倾向于采用裸露且可检视的金属连接。
PHOENIX 提供哪些非绝缘端子类型?
该系列涵盖SNB叉、DBN刀片、PTN引脚、OT / OTZ / OTS 环、UT叉、IT引脚和IT双层平面端子,以及JB / JC / JZ 海用裸端子和C45插入端子。环形、叉形、刀片和销钉款式涵盖宽广的线材和螺柱。
我该如何选择合适的非绝缘端子?
匹配三个值:线材横截面、螺柱或卡片尺寸,以及所需的连接样式。选择环形连接以实现永久抗振动接头,选择叉形以快速维护,刀片或销钉用于插入式插座。之后再加一个 V 系列端子护套来绝缘压接。
环形和叉形非绝缘端子有什么区别?
环形端子完全环绕螺柱,若不拆除螺丝无法脱落,因此在存在振动时是安全的选择。叉形端子可滑入松动的螺丝下方,无需拆卸紧固件即可安装或拆卸,从而加快组装和维护速度。
什么是 JB / JC / JZ 海事裸码头?
JB、JC 和 JZ 是为海洋和高电流应用设计的重型裸耳。它们可接受较大的电缆段,通常用于船舶、车辆和工业设备的电池、接地和电力分配连接。
C45 插入端子是做什么用的?
C45 插入端子与 C45 类型的模块化端子台和配电板一起使用。它们提供紧凑的裸压接连接,嵌入模块中,这在建筑布线和控制柜配电中常见。
OT / OTZ / OTS 环形端子覆盖的线材和螺柱尺寸是什么?
OT、OTZ和OTS环形端子覆盖22–10 AWG(0.5–6 mm²),孔径从M3到M8。OTZ是一种窄管变体,适用于狭窄空间,OTS则是较重版本,适用于较大段电缆。订购前请查看具体系列列表。
为什么选择镀锡铜非绝缘端子?
锡镀层比裸铜更能抵抗氧化和腐蚀,尤其是在潮湿或沿海环境中。PHOENIX 枪管采用 T2 铜制成,表面镀锡,具有良好的导电性和长期可靠性。
对于非绝缘端子,我应该用什么压接工具?
使用与线材尺寸和端子筒匹配模具的棘轮压接工具。颜色编码的腔体帮助你选择合适的模具,棘轮则确保完整的压接循环。避免使用钳子或非棘轮工具,因为它们会造成不均匀的压紧。
非绝缘端子适合户外或海洋使用吗?
是的,只要配合合适的保温材料。端子本身是裸露的,所以压接后应用热缩护套、V 系列端子护套或绝缘胶带覆盖接头,以保护户外或海洋环境免受潮湿和腐蚀。
非绝缘端子是否符合 RoHS 的要求?
是的,所有PHOENIX非绝缘端子均符合RoHS指令,采用镀锡T2铜和无铅材料制造,适合出口至欧盟及其他国际市场。