Cable Lugs 产品系列
DT Series Copper Cable Lug (Oil Blocking Type)
DT SeriesDT Series copper connecting terminals are pressed from T2 copper bar and tin-plated. The closed oil-stop barrel is sealed at the palm end, so crimped joints on distribution panels and cable runs stay free of moisture and compound.
查看系列
DL Series Aluminum Cable Lug (Oil Blocking Type)
DL SeriesDL Series aluminium connecting terminals are pressed from 1060 aluminium bar. They are the usual choice for aluminium cable on distribution equipment where a copper lug would create a dissimilar-metal joint.
查看系列
DTL Series Copper-Aluminum Cable Lug
DTL SeriesDTL Series copper-to-aluminium bimetal cable lugs have a T2 copper palm friction-welded or cold-pressed to a 1060 aluminium barrel. The transition eliminates galvanic corrosion at the aluminium-to-copper interface and allows aluminium cable to terminate on copper busbars in switchgear and transformers.
查看系列
JG Series Copper Connecting Terminal
JG SeriesDT Series copper connecting terminals are pressed from T2 copper bar and tin-plated. The closed oil-hole barrel traps lubricant during crimping to reduce crimp force and improve conductor fill. Used for heavy-power terminations on motors, switchgear busbars and transformer tap changers.
查看系列
SC (JGK) Series Imported Copper Cable Lug
SC / JGA SeriesSC(JGK/JGA) Series tin-plated copper cable lugs are drawn from seamless copper tube and tin-plated, then fitted with a PVC insulating sleeve over the barrel. The heavy-wall construction withstands the forces of hydraulic or mechanical crimping and provides a corrosion-resistant termination for panel boards and motor terminals.
查看系列
OT Series Copper Open Cable Lug
OT Open Type / GT-1OT-A Series open-barrel copper cable lugs are stamped from red copper sheet. The open C-shape barrel accepts the conductor from the side and is then closed by crimping, which suits inline field terminations where the cable end is not accessible. Tin-plated option available.
查看系列
SC(JGA) Series Imported Copper Connecting Terminal
SC(JGA) SeriesImported C45 pin, material red copper tube, surface tin-plated. Designed for heavy-duty cable terminations in power distribution, industrial equipment and electrical panels. Covers conductor cross-sections from 10 mm² to 240 mm².
查看系列行业与应用
适用于汽车、家电、机械和电力设备制造的绝缘端子。
-
工业控制与自动化
面板制造商使用环形和叉形端子进行PLC I/O接线、接触器和端子块,需要安全的螺丝连接。
-
汽车与运输
线束制造商指定彩色绝缘端子用于照明、传感器和电源电路,其中抗振动性能很重要。
-
家用电器
洗衣机、空调器和烤箱依靠全绝缘端子进行内部布线,这些布线必须保持安全且紧凑。
-
工业机械
机器制造商将环形、叉形和断开端子安装到电机、传感器和在苛刻环境中运行的控制柜。
-
电气设备制造
开关设备和配电板使用镀锡铜端子进行稳定的电流传输并抵抗腐蚀。
常见问题解答
线缆耳是用来做什么的?
电缆耳将大型铜或铝电缆终端于配电、开关设备、变压器和工业机械中的螺柱、母线和设备端子上。它们提供高电流、低阻抗的连接,小端子无法承受。
PHOENIX 提供哪一系列线缆端子?
PHOENIX 供应 DT 铜鼓耳、DL 铝鼓耳、DTL 铜铝鼓耳、JG 铜连接鼓耳、SC / JGA 进口铜鼓耳以及 OT 开放式鼓耳。每个系列都针对特定的导体材料和电流水平设计。
DT 铜鼓耳和 DL 铝合金耳塞有什么区别?
DT表耳由铜制成,采用具有优异导电性和耐腐蚀性能的铜导体。DL端子采用铝制,适用于铝制电缆,在大截面动力应用中减轻重量和成本。一定要把鼓耳材质和线材匹配。
DTL铜铝接耳是做什么用的?
DTL表耳配有铜管和铝制掌纹,或为双金属结构,允许铝制电缆连接到铜母线或端子。它们常见于变电站和配电箱中,金属混合处处。
DT和DL表耳上的“油阻”是什么意思?
阻油耳采用密封筒形设计,防止油或湿气沿导体渗入连接处。它们被用于变压器、充油设备以及需要密封的户外安装。
JG / SC(JGA)连接耳是用来做什么的?
JG 和 SC(JGA)端子是铜制连接端子,用于将电缆连接到平面母线或设备焊盘。宽掌设计使接触区域更宽,并符合标准螺栓模式,因此在开关设备和配电板中很常见。
我该如何选择合适的凸耳尺寸和螺栓孔?
将枪管孔与钢索截面相匹配,将掌孔与螺柱或枪机直径相匹配。常见的螺栓孔尺寸为 M6 至 M16,电缆尺寸范围从 10 mm² 到 300 mm²。具体尺寸请参阅系列表。
重型钢索耳采用何种压接方法?
大型凸耳需要配备液压压接工具,模具尺寸与钢索和枪管尺寸相匹配。从枪管端向掌部压紧,施加最大压力,检查压紧压缩。合适的压接能提供气密、低电阻的接头。
OT型开放式线耳是用来做什么的?
OT开放式耳具有分体式枪管,允许从侧面插入电缆,这在电缆端已终止或接触受限时非常有用。GT-1 是某些 OT 风格的配套配件。
PHOENIX 线缆耳是否符合 RoHS 标准?
是的。所有PHOENIX铜和铝耳均符合RoHS指令,在需要时采用锡镀表面处理,并采用无铅材料,适合国际出口。