Wire Connectors 产品系列
Non-Insulated Butt Connectors
BNT SeriesBNT Series non-insulated butt and parallel connectors are cut from seamless copper tube and tin-plated. They join two conductors end to end without insulation, then the joint is taped or covered with heat shrink.
查看系列
Vinyl & Nylon-Insulated Butt Connector
BV SeriesBV Series insulated butt connectors combine a seamless copper tube with a vinyl or nylon sleeve, so a splice can be made without extra insulation. The sleeve is colour coded to the wire range and keeps the joint protected from vibration and moisture.
查看系列
Vinyl-Insulated Parallel Connector
PVT SeriesPVT Series insulated parallel connectors accept two conductors side by side in a copper tube sleeve and crimp them in a single operation. The tap connection is made without cutting the main conductor, which is the standard method for adding branch circuits to an existing wire run.
查看系列
Long Full-Insulated Butt Connector
BHT SeriesBHT Series heat-shrink butt connectors combine a tin-plated copper splice tube with a dual-wall polyolefin sleeve pre-coated with hot-melt adhesive. After crimping, heating the sleeve seals both wire entries against moisture, making this connector the preferred choice for marine, agricultural and outdoor repair applications.
查看系列
Screw-On Wing Wire Connectors with Spring Insert
WN SeriesWN Series screw-on wire connectors (wire nuts) are twist-on splices with a brass spring insert inside a flame-retardant nylon cap. Spinning the cap onto two or more conductors causes the spring to grip and coil the wires together without stripping or tools. Standard in residential, commercial and light-industrial wiring.
查看系列
Quick Splice Connectors
QS SeriesQS Series quick-splice connectors use an insulation-displacement contact (IDC) that pierces the insulation of both conductors when the cap is squeezed closed, making a branch connection without stripping or tools. The colour-coded PVC housing resists oil, acids and alkalis and is rated for 600 V / 10 A.
查看系列行业与应用
适用于汽车、家电、机械和电力设备制造的绝缘端子。
-
工业控制与自动化
面板制造商使用环形和叉形端子进行PLC I/O接线、接触器和端子块,需要安全的螺丝连接。
-
汽车与运输
线束制造商指定彩色绝缘端子用于照明、传感器和电源电路,其中抗振动性能很重要。
-
家用电器
洗衣机、空调器和烤箱依靠全绝缘端子进行内部布线,这些布线必须保持安全且紧凑。
-
工业机械
机器制造商将环形、叉形和断开端子安装到电机、传感器和在苛刻环境中运行的控制柜。
-
电气设备制造
开关设备和配电板使用镀锡铜端子进行稳定的电流传输并抵抗腐蚀。
常见问题解答
PHOENIX 提供哪些类型的线缆连接器?
PHOENIX 提供 BNT 非绝缘对接连接器、BV 乙烯基和尼龙绝缘对接连接器、PVT 乙烯基绝缘并联连接器、BHT 长型全绝缘对接连接器、带弹簧插入的 WN 螺旋翼连接器以及 QS 快速接头连接器。
接头是用来做什么的?
接头将两根导线端相接成直线。两根剥离的导线进入金属套管的两端,并被压接固定,形成一种永久性的串联接头,广泛应用于汽车、家电和建筑布线。
BNT非绝缘接头和BV绝缘对接连接器有什么区别?
BNT连接器是裸金属套筒,压接后必须用胶带或套管单独绝缘。BV连接器包含覆盖接头的乙烯基或尼龙绝缘桶,提供内置绝缘和应力缓解。
PVT并行连接器是用来做什么的?
PVT并行连接器是将两根线并排连接,而不是端对端。它们用于在照明电路和电器线束中分支或延长导体,压接处外加一层乙烯基绝缘套管。
BHT 长型全绝缘对接连接器有什么特别之处?
BHT连接器配有加长绝缘管,覆盖压接和线护套,提供密封且应力缓解的接头。它们适用于户外、海洋和潮湿环境,标准接头会暴露在外。
WN 螺旋式翼线连接器是如何工作的?
WN翼连接器采用螺旋绝缘盖内的弹簧嵌件。你把导线剥下来,把它们塞进机盖,然后扭动机翼壳,把导体拉在一起,形成一个牢固的弹簧锁定连接。它们可重复使用,无需压接工具。
QS快速接头是如何工作的?
QS快速接头可以让你在不剪断现有导线的情况下接入它。主线保持完整,同时插入第二根导线到侧通道,并用钳子按压带铰链的金属夹子,刺穿绝缘层并接触。
我该如何选择适合我线材尺寸的连接器?
将连接器与线材截面相匹配,通常为22–10 AWG(0.5–6 mm²),并根据环境选择绝缘类型。户外使用绝缘型或热缩式类型,并把颜色编码与线材范围相匹配。
这些线连接器可以重复使用吗?
压接式接头和并联连接器是永久性的,压接后不应重复使用。如果弹簧插入件完好,WN旋式机翼连接器可以拆卸并重复使用。QS快速接头设计为一次性使用。
安装这些连接器需要哪些工具?
压接连接器需要带有正确模具的棘轮压接工具,而WN翼连接器和QS快接头只需螺丝刀或钳子。对于防水接头,可以在完成的连接处加一个热缩套管。